Seagate PCB 100617465 Failure

PCB failures (Such as Seagate PCB 100617465) affect thousands of hard drives every year and often result in permanent data loss. A hard drive may suddenly fail to power on, and a computer may not detect that it is plugged in. Some failed hard drives will also show up in computer BIOS with incorrect brand/model information. PCB failures can also cause physical issues such as read/write head failures, and many PCB failure symptoms overlap with the symptoms of other physical hard drive issues.

Some emails from customers of Seagate PCB 100617465 failures are listed below, along with tips for replacing & repairing.

Seagate PCB 100617465 Failures:

Q: ST1000DL002 Short Points for PCB 100617465 REV B

Hello, Please, any idea what the short points are on this PCB? Thanks

Q: shorting points

Hello I’m searching the shorting points for seagate pcb 100617465 on a ST2000DL001 drive. Isolating motor contacts doesn’t work thanks Fran?ois

Q: PCB Seagate ST1000DL002

I need a PCB for my HDD Seagate ST1000DL002My expecifications are:Model number: ST1000DL002Part Number: 9TT53-301Serial Number: W1V06GWAFirmWare: CC32Site: WUDate: 11362PCB: 100617465 Rev-BNumber Of Main Chip: B6650BNumber Of motor Chip: SH6998BThanX

Q: Need – PCB Seagate ST1000DL002

I need a PCB for this HDDS/N: W1V0MYVZModel number: ST1000DL002P/N: 9TT153-301FirmWare: CC32Site: WUDate: 12042PCB: 100617465 Rev-BNumber Of Main Chip: B6650BNumber Of motor Chip: SMOOTH MCKXLSee the picture.Thanks.

Q: Seagate ST1000DL002 burned PCB 100617465 REV B

Hello, i’ve this Seagate ST1000DL002 with burned PCB.PCB number is 100617465 REV BI’m going to repair it with wire wrap and capacitor substitution (but i don’t know it’s value), someone does it know the value of the capacitor indicated in the pic?There are also 2 destroyed fuse, but i don’t care because i’m goin to substitude them with wire wrap, i nedd your help for the capacitor value. Does any of you know the value?Thank you.As you can see in the pic, Attachment:PCB Bruciata.jpg [ 527.57 KiB | Viewed 14095 times ]

Q: Seagate 2tb HDD pcb got fired

Dear all,i have accidentally fired my 2TB seagate barracuda hard disk pcb.I have another pcb of Barracuda same pcb number, firm ware, model but the revision is different.100617465 REV A and fired pcb is 100617465 REV B.My doubt is whether i can swap the pcb to recover the data.if i can swap then Should i swap the rom also from fired pcb to the otherplease help

Q: Barracuda Green PCB 100617465 shorting points

Hello, do you know which are the points to short in this pcb to unlock the terminal comunication? ^Z doesn’t work, i don’t get the F3 T level It shows this when i power on Boot 0x20M Spin Up[0x000246DF][0x000246E4][0x00021889][0x000218A9][0x000218AA][0x000218AD] [0x000218CA][0x000218E6][0x000218E9][0x000218E9]ZZZZMMMMMMMMMMMMMMMZZZZZZZZZZZZZ ZZZZZZZZZZZZZZZZZZZZZZZMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMddddddWYWYWMMMMMMSxxx xZWZWZWZWZWZWZWZWBBWYWYdd Trans Rst 0x20M MC Internal LPC Process Spin U

Q: Seagate HDD damaged

any noise, just dead I checked the pcb – nothing looks burned, no any specific smell of burnt electronics I think the PCB is damaged, right ? I ordered the exact PCB through e-bay (everything is the same) ST2000DL001 P/N 9VT156-570 FW CC96 PCB 100617465 REV A However they recommend me to swap the rom chip, but I dont know which one is the rom, there are 2 similar chips, which one from picture is the rom chip I should swap? i01ialiimgcom/wsphoto/v0/1361264265_1/Free-Shipping-100617465-font-b-HDD-b-font-font-b-PCB-b-font-Logic-Board-Boardjpg

Q: Seagate ST2000DL001 fail – which chip to swap?

similar), symptomps are hdd wont spin, no clicks, total silent, there are no visible burns on PCB, no any smell I think the PCB is damaged, am I right ? I ordered exact same PCB from Specs ST2000DL001 PN 9VT156-570 FW CC96 PCB 100617465 REV A – My questions are If all parameters are the same, will I need to do ROM swap to new pcb ? Which one of chips should I swap (see attached picture), I have no idea, which one is the correct rom -(

Q: Fired hdd pcb replaced with cloned hdd pcb from datapro

Dear all,i have accidentally fired my 2TB seagate barracuda hard disk pcb.The pcb of Barracuda with number, firm ware, model and revision iis 100617465 REV B.I got an identical pcb for the fired hdd from data pro data recovery Canada. I have send the burnt pcb to them and they have given me a pcb which is cloned. I installed the hdd and found that it’s detecting but the size was showing only 8gb instead of 2tb. Could anyone throw light into this?.

Q: PCB issue with Seagate drive?

is for curiosity’s sake) I’ll post pictures of the PCB and also a closeup of the chip in question i58tinypiccom/10glcghjpg i61tinypiccom/2lbpdl2jpg Also my drive info Seagate Barracuda “Green” 2TB ST2000DL001 PCB 100617465 rev B Thanks in advance guys

Q: Seagate ST2000DL003 Blown TVS

Hi Guy’sI have blow the TVS Diode on my hdd motherboard, when removing it I damaged the solderstrip on the board, please can anyone tell me how I can fix it.100617465 REV AThank you

Replacement Seagate PCB 100617465:

To repair a failure board, the simple way is swapping the failure board with a replacement board. Donor boards on HardDriveParts.com are listed below:

Contact US

If you have any questions, please feel free to contact us: sales@harddriveparts.com