Seagate PCB 100466824 Failure

PCB failures (Such as Seagate PCB 100466824) affect thousands of hard drives every year and often result in permanent data loss. A hard drive may suddenly fail to power on, and a computer may not detect that it is plugged in. Some failed hard drives will also show up in computer BIOS with incorrect brand/model information. PCB failures can also cause physical issues such as read/write head failures, and many PCB failure symptoms overlap with the symptoms of other physical hard drive issues.

Some emails from customers of Seagate PCB 100466824 failures are listed below, along with tips for replacing & repairing.

Seagate PCB 100466824 Failures:

Q: Wanted: PCB for Seagate ST31000340NS

I’m looking to purchase a PCB for a Seagate ST31000340NS – PCB 100466824 rev. B – firmware SN04

Q: Problem with 7200.11

I’ve tried reads or recognizes the drive (ie Media Tools Pro) On previous tries I’ve also had constant clicking Here’s the drive’s description Seagate Barracuda 720011 1TB S/N 9QJ1DPHH ST31000340AS P/N 9BX158 – 303 FIRMWARE SD15 PCB100466824 REV C I’ve since found out that there was a serious firmware issue with these drives Using Seagate’s tool I checked the six 720011 1 TB drives we own and found out the one that crashed indeed has the problem I contacted Seagate support,

Q: Seagate HDD not detected in BIOS

Hey there, I’ve got a Seagate Barracuda 720011 750Gb SATA hard drive Model ST3750330AS FW SD35 PN 9BX156-568 PCB 100466824 Rev B UJAJ-6 FYI, this originally was a Seagate FreeAgent Pro External HDD, but I removed the outer casings so the drive is essentially the internal one referenced above now I was using it one day, went away and while I was gone my system decided to help me out and install a TON of those important microsoft

Q: Need PCB for Seagate Freeagent Pro/Barracuda ST3750330AS

Item Information HDD Info ====== Seagate 720011 750 GB Model number ST3750330AS (*Originally out of a Freeagent Pro Ext HD) Date Code 08276 Site Code WUXISG Capacity 750GB PCB Info ====== P/N 9BX156-568 PCB 100466824 Rev B UJAJ-6 *The possibly tricky thing here is that my drive originally came out of a Seagate Freeagent Pro External HD So, Im thinking to be able to match it as close as necessary, the matching drive would also need to be from a Freeagent Pro Ext And

Q: NEED PCB For Seagate Barracuda ST3750330AS 7200.11 750 gb

Hello there. MY Hard Drive: S/N: 9QK13S8 – ST3750330AS – P/N: 9BX156-303 – Firmware: SD15 – Date Code: 09123 – Site Code: KRATSG – WWN: 5000C5000D89410.On PCB: UJAJ-6 – PCB 100466824 REV C – TS-M-8V01C SG – 0832-19-29. THNX

Q: WTB Seagate ST3750330AS PCB

My drive has over 11,000 Mp3’s and I just really don’t want to start my library over. Recovery services are rediculous in price for us personal PC users!The drive failed when I wasn’t home and took out my motherboard some how.Anyways, here are the particulars of the drive.PCB 100466824 Rev CP/N: 9BX156-303Firmware: SD15Date Code: 0805Site Code: WUXISG

Q: Wanted: Segate 750GB SV16 PCB

Does any body have the PCB for Segatte 750GB SATA HDDPCB: 100466824 REV BModel Number: ST3750330SVFirmware: SV16 Date Code: 08396Product of Thailand.Site Code: KRATSG

Q: Matching PCBs for Seagate – Help swapping(HI RES PICS)

I have found very very similar PCBs wanted to know what to do to make it work Only experts answer PCB 1 details 750GB Segate SATA Model Number ST3750330SV Firmware SV16 Date Code 08396 Product of Thailand Site Code KRATSG PCB Number 100466824 REV B VCM Controller or SMOOTH CHIP number 100439116 MCU or Big Chip TTB5501D Memory Chip 1st line W9425G6DH – 5 2nd line08075 3nd line 67400V900 PCB 2 details 250GB Segate SATA Model Number ST3200310AS Firmware 3 AAC Site Code

Q: 750GB SATA Seagate – PCB Replacement Help

Hello, Below is my seagate HDD details PCB Number 100466824 REV B VCM Controller or SMOOTH CHIP number 100439116 MCU or Big Chip TTB5501D Card was burnt due to SATA connector cable problem Wanted to do PCB replacement Got 2 PCB cards which is 11 match for the above specs, the HDD doesn’t run at all However if i put new 1TB card the HDD spins properly which proves no motor issue or anything

Q: Pcb for Seagate 7200.11

Looking for pcb 100466824 rev C; The firmware is SD81. Thank you for any help i can receive; and if more information need ill add.

Q: Please help with Seagate ST3750330AS

save data from suddenly died 720011 ST3750330AS 750Gb HDD By luck I have 720011 1TB HDD (ST31000340AS), with looks like exactly the same PCB, and Firmware different only slightly SD35 on dead, SD15 on good 1Tb Both PCB have the same number 100466824, but revision is different (B on 750, and C on 1Tb) Bad PCB does not show any signs of fried elements but it has light distinct smell of fried components HDD is silently dead, no spinning Direct swap of boards with 1TB drive, made progress

Q: ST31000340AS Dead

a “direct PCB swap” isn’t going to work with this series, something about an EPROM (=flash transfer??) 4 Can I try cutting off the TVSs and then send it into a flash swap/PBC replacement Co? Detailed drive info The PCB is UJAJ-6 PCB 100466824 RevC MCU (main chip unit?) LSI TTB5501D Seagate e3 0811T7907317 35MM001 1182057 Memory Samsung 813 K4D551638H-LC50 Flash 25X40L001 0801 P/N9BX158-568 Firmware SD81 Site Code WUXISG Date Code 08434 Thanks in advance

Q: Seagate Barracuda 7200.11 – ST3750630AS

Looking for 750 GB Seagate Barracuda 7200.11 MDL: ST3750630ASPN: 9BX146-100FW: LC11WWN: 50000C5000E6A5A16PCB: 100466824Site Code: WUXISGPlease PM

Q: Require some advice on seagate 7200.11

working due to not spinning, mind i’m checking once more tomorrow Now the interesting bit I was looking through some spares we have, and i’ve found a PCB with same matching codes but on a bigger model I have ST3750630AS | PCB code is UJAJ-6 100466824 | PCB Sticker is 100468979 Donor ST31000340AS | PCB Code is UJAJ-6 100466824 | PCB Sticker is 100468979 If i attempt to do a ROM transfer would that work even though the Donor board is specific to a larger model? If it is possible is the

Q: Problem with Seagate ST31000340NS

office and plug it into a drive dock (ac power, usb connection) Nothing IT doesn’t spin up or run So now this leads me to believe that this drive’s PCB failed The drive is a Seagate ST31000340NS The PCB shows the following on it UJAJ-6 PCB 100466824 Rev A I’m unsure if I just need to buy the board & swap the 8pin (ROM and firmware) chips to the new PCB, or if I need to have the whole drive shipped out for hte PCB to get replaced Anyone recommend somewhere i can do this? This drive

Q: ST3750330NS, ST500DM002 for sale

Selling these recertified by Seagate HDD-s, PM, if interested.ST3750330NS Barracuda ES.2FW: SN16Date Code: 08332Site Code: WUXISGPCB 100466824 Rev B-ST500DM002 BarracudaFW: KC48Date Code: 11213Site Code: SUPCB 100535704 Rev B-ST500DM002 BarracudaFW: KC48Date Code: 11213Site Code: SUPCB 100535704 Rev C

Q: Seagate ST31000340AS Is It 7200.11 BSY bug Or Bad PCB

it that led me to remove the PCB in the first place The codes on the front label are ST31000340AS P/N 9BX158-335 Firmware SD15 Date Code 08453 Site Code KRATSG Product of Thailand The codes on the PCB are Printed on the board UJAJ-6 PCB 100466824 REV C Printed on a sticker on the board 100468979 H C8423U7L I also want to add that although this hard drive was manufactured in 2008, it was still shrink wrapped in a box and not put into use until the end of 2012, so it has only been

Q: ST31000340AS SD04 Firmware request

Seagate 7200.11ST31000340ASFW: SD04PCB: 100466824 REV BI need PC3K firmware resources for this drive. If anyone could supply that would be great.Also, where else can i search for firmware resources? The files are okay on this site but a lot of drives are missing. :SCheersCleanestRoom

Q: st3750630as uart not accepting any RX

CTRL+Z, no prompt comes up Any idea why this drive wants to be ‘different’? As an extra I could use a native RS232 port with an extra RS232-TTL adapter but I’m not sure this is the problem Full label iimgurcom/u7OZe4bjpg PCB ID’s 100466824 rev c (this is etched in the board copper layer) on the sticker below it 100468979 j k902bbd7 When I connect to a random samsung drive, serial I/O is fine, when I connect to a different seagate drive, it also works, so I know my setup is

Q: seagate barracuda 7200.11 issue

was clicking Just recently I decided to try to fix it myself Here are the specs on the drive Seagate Barracuda 720011 (750 GB) S/N – 9QK0ET4W ST3750330AS P/N – 9BX156-568 Firmware – SD81 Date Code – 08387 Site Code – KRATSG PCB – UJAJ-6 PCB 100466824 REV B I purchased a donor drive based on a website that told me which numbers to match up and finding a date code within 3 months of my original The drive I purchased has the following specs Seagate Barracuda 720011 (750 GB) S/N –

Replacement Seagate PCB 100466824:

To repair a failure board, the simple way is swapping the failure board with a replacement board. Donor boards on HardDriveParts.com are listed below:

Contact US

If you have any questions, please feel free to contact us: sales@harddriveparts.com