PCB failures (Such as Seagate PCB 100645422) affect thousands of hard drives every year and often result in permanent data loss. A hard drive may suddenly fail to power on, and a computer may not detect that it is plugged in. Some failed hard drives will also show up in computer BIOS with incorrect brand/model information. PCB failures can also cause physical issues such as read/write head failures, and many PCB failure symptoms overlap with the symptoms of other physical hard drive issues.
Some emails from customers of Seagate PCB 100645422 failures are listed below, along with tips for replacing & repairing.
Seagate PCB 100645422 Failures:
Q: Seagate PCB 100645422 Short Points
Does anyone know the short-out point for this boardModel number ST2000DM001The ace manuals do not have that one listed yet.ThanksI attached a zip of the front and back of the board.
Q: Need PCB for ST2000DM001
I have a Seagate Barracuda 2TB ST2000DM001 that I need a PCB for. I currently have a donor drive but the board on it is a different revision. I’m looking for PCB # 100645422 REV AThanks!
Q: PCB revision question on ST2000DM001
Hello everyone, I have a 2TB Seagate Barracuda ST2000DM001 in for data recovery that has a bad PCB I found the same model number donor drive, but the revision on the PCB is different The drive I’m trying to recover data from uses a 100645422 REV A board The donor drive uses a 100687658 REV C When I swap over the ROM chip to the donor board, the drive powers on, spins up, but does not get detected by the DDI Any suggestions on a workaround or do I absolutely have to have the correct
Q: Seagate ST2000DM001 Fails to Detect but Spins
viewer I appreciate all the help that the community provides, and hope that everyone is doing well Today I come to you all with an issue regarding a Seagate ST2000DM001 2TB HDD (PN# 9YN164-568 , FW CC96 , Date 12027 , DOM 07/2011 – with PCB #100645422 REV A and PCB ROM firmware 25FS406 , 01, 1RH00) The drive was removed from an external Seagate enclosure after the owner reported that the external enclosure had experienced intermittent connectivity issues The owner described that the
Replacement Seagate PCB 100645422:
To repair a failure board, the simple way is swapping the failure board with a replacement board. Donor boards on HardDriveParts.com are listed below:
- Seagate PCB Board 100645422 REV A
- ST1000DM003 Seagate PCB Circuit Board 100645422
- ST2000DM001 Seagate PCB Circuit Board 100645422
- ST3000DM001 Seagate PCB Circuit Board 100645422
If you have any questions, please feel free to contact us: sales@harddriveparts.com